Design Revision Notes - 1/14/15
Posted by Justin Bernard on January 14, 2015
- add top/bottom gradient masks on selector wheel
- top nav bar progress fill addition ui element
-manual entry screen, change header copy to 'enter bike'
- change 'brand' to 'make'
- select bike type, change header to 'select bike type', update list from wireframe, combine all mnt/enduro to enduro
DBair (lowercase is small caps)
DBair CS
DBinline
DBcoil
- check buffer on selector wheel bg's for font/box consistency
- wood panel bg, add more spacing, little irregularity, show bg color behind cracks
- on rider weight panel, do metric conversion ( 175lb/250) (do shock range from 80lbs to 300)
- change 'personalize tune' to 'personalize'
- change copy 'save and return' to 'save and exit'. remove trail access (just leave ample riding time). reverse order of radio buttons. header , change 'save or tune' to 'alert', remove alert from body copy.
- add popup 'alert' screen if base tune is found, don't if its taking them to neutral tune screen.
- change 'neutral tune' to 'factory tune' on 'found' screens
- if base tune found, make grey area larger, add recommended base tune sag mm,
- change title 'AVS setting' to 'air volume'
- add 'avs spacer' icons (similar to on base tune card)
- factory neutral set to 0 for avs. page 18/19 changed/removed
- add screen to type in personal tune and avs screen. use big overlay screen like the tune questions screen.
- change sag alert screen to 'sag is crucial. don't skip this step'
- make tune screens that have selector wheel use larger vertical panel to accommodate more spacing
- make ssetup/tune/save icons smaller so it can work vertically. fill it up from left to right instead of just highlight active one
- change psi selector to psi and bar. change psi to 1 psi range
- on sag setup textual screens, add vector illustrations to explain steps, from field tuning guide. use different illus for coil or air shock
- on sag screens, run less text on a screen so we can run inline illustrations, then move
- page 26 available misspelled. 'recheck and repeat' unitll you have desired measurement. remove formula.
- kill page 29, as shock length is already known
- on preload screens, change 'hader to set sag-preload'
- page 32, add period ofer sag, and 'a' before higher
- add 'congrats' popup after setting up sag.
- page 35, update copy to prior save/continue popup screen copy