✔ touch overlay adhesive
(Completed by Arlen Millner on July 10, 2015)
Comments
Justin Bernard on June 29, 2015:
i think i told you this alrady, but the touch overlay we have for the first one you got (not pq labs), the adhesive was juuuunk. like a step up from double stick tape for real. the pq labs overlay had crazy stuff, like no way you are going to get off without chemical adhesive
that bad adhesive works fine for table mount, with the overlays weight holding it on, but it wont stick for wall mount, which is where that display currently is in conf room at office
need some super heavy duty stuff. like 1/4"-3'8" max width
should we go with something lesser than that, just in case ever want to get off? they make it out like thats mega permanent, like using screws
Taylor Bernard on June 29, 2015:
well they sell about 15 others. ive used the 'extreme' before but thats still 'consumer grade'. the VHB is commercial/industrial. used in automotive and stuff like that its pretty serious. i dont know how one of the off the shelf ones would hold up compared to stuff you have on there now though. probably better no matter what.
pq's manual is just calling it 3m double sided tape
dont want it to be thick/foam though, as low profile as it can be the better
the stuff i put on the callidus cloud overlays last fall was like black/rubber/very dense, super sticky. but wasnt like some crazy commercial stuff, i stuck it a few times and was able to pull back up to repos
Comments
Justin Bernard on June 29, 2015:
that bad adhesive works fine for table mount, with the overlays weight holding it on, but it wont stick for wall mount, which is where that display currently is in conf room at office
need some super heavy duty stuff. like 1/4"-3'8" max width
Taylor Bernard on June 29, 2015:
3M VHB tape is not coming off.
Justin Bernard on June 29, 2015:
Taylor Bernard on June 29, 2015:
i dont know how one of the off the shelf ones would hold up compared to stuff you have on there now though. probably better no matter what.
http://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Daps&field-keywords=3m+foam+tape
Justin Bernard on June 29, 2015:
dont want it to be thick/foam though, as low profile as it can be the better
the stuff i put on the callidus cloud overlays last fall was like black/rubber/very dense, super sticky. but wasnt like some crazy commercial stuff, i stuck it a few times and was able to pull back up to repos
Taylor Bernard on June 29, 2015:
Arlen Millner on July 7, 2015: